Scanning with a Linea Pro Attachment (iOS Only)
DOWNLOAD YOUR TICKETS.
Before you attempt to scan, please make sure you have followed all of the instructions in section 1, Getting Started with Axess / Device Setup.
ACTIVATE THE SCANNER.
Tap LAUNCH SCANNER to open the main scanner view. You can also tap the square target icon in the top right to activate the scanner at any time. You should receive a Ready to Scan message if the sleeve is active and properly attached. (See the FAQ for tips on troubleshooting an unconnected Linea Pro.)
- Position the scanner within 6-8 inches of the ticket.
- Press the button on the right side of the Linea Pro sleeve to activate the laser.
- Point the laser at the center of the barcode.